Garage Door Opener Won't Close When Sunny Fix

Like this article? Please help by Liking, +1'ing, Tweeting or Pinning. Thank you!
This article represents my own opinion and may contain affiliate links. Please read my disclosures for more information.
Have you ever had a problem with your garage door not closing on a sunny day? You click the button to close the garage door and the garage door opener lights start flashing and the door doesn't move or it starts to roll down and then rolls back up. This is a quick tip article on how to fix it.

I had that problem myself recently and I knew someone that was also having the same problem. It was worse for me because my garage door faces south and gets a lot of direct sunlight throughout the day.

The problem is the infrared safety sensors which sit at the base of the tracks that prevent the door from closing when there's something in the door opening can get somewhat blinded if there's too much sunlight. At night or on overcast days the garage door opener works perfectly, but on bright, sunny days I'd have to get out of my car and hold down the button the keypad to force the door to close.

I searched the internet to try to find a solution to the problem and most people recommended adding some sort of devices to cast shade on the sensors. This didn't make a lot of sense to me. The sensors are installed behind the walls and there was no direct sunlight being cast on them. If for some reason you do have direct sunlight on your sensors then that's something you can try. The fix I found was much simpler.

When I finished installing my garage door opener one weekend it was dark out. I aligned the sensors and it worked fine. The next day it was very sunny and the door wouldn't close.

After a few days of problems I tried to re-align the sensors while the sun was out. Once I had the sensors optimally aligned during the sunniest part of the day the garage door opener has been working perfectly.

If you're having the same problem, try to re-align your garage door opener's safety sensors. When the sensors are properly aligned an LED on each should light up.

5 comments :

  1. Wow Amazing idea! easy and simple way to re-align the garage door opener. Thank you sharing this wonderful idea. thumbs up!

    ReplyDelete
  2. I don't get it. So the big solution is to re-align the sensors?

    ReplyDelete
    Replies
    1. I wouldn't call it a big solution or a big problem. It's something that might not be apparent if you're garage door opener is working fine most of the time but it's having problems when sunlight is streaming into the garage.

      Delete
    2. If the LED on the sensor is already lit up, I'm not sure how to re-align the sensors? It works great in the morning and at night. But won't close in the afternoon.

      Delete
  3. I'm going to give it a try. Do I need to reset them somehow before I do? (Unplug and plug back in?)

    ReplyDelete